Bosch GPL Professional 3 G Mode D'emploi page 25

A
180°
– Turn the measuring tool 180°, allow it to level in and mark the centre point of the laser
beam on the opposite wall B (point Ⅱ).
– Position the measuring tool – without rotating it – close to wall B, switch it on and al-
low it to level in.
A
– Align the height of the measuring tool (using the tripod or by placing objects under-
neath as required) so that the centre point of the laser beam exactly hits the previ-
ously marked point Ⅱ on wall B.
Bosch Power Tools
English | 25
B
B
1 609 92A 5MH | (22.10.2020)