Cleaning And Maintenance - Meister MET36ME Traduction Du Manuel D'utilisation Original

Switching the tacker on/off
− Set the on / off switch (4) to posi-
tion „I" to switch on the tacker.
− Set the power switch to the „O"
position to turn off the tacker.
Using the tacker
WARNING! Danger of injury!
Improper handling of the
tacker can cause injuries.
− Do not hold the tacker by the
trigger if a staple is jammed in
the tacker. When removing a
jammed staple, the trigger can be
accidentally pressed.
Carefully place the tacker guide (10)
onto a soft work piece. Otherwise,
the work piece may be damaged.
1. Grab the tacker by the grip (3).
2. Place the tacker guide firmly onto
the work piece and then press
the trigger (2).
The staple or the nail is shot into the
work piece.
7 – Cleaning and
Maintenance
NOTE! Risk of Damage!
Water or other liquids that
have entered the housing may
cause a short circuit.
− Never immerse the stapler in
water or other liquids.
5459600-Akku-Tacker_man.indd 61
− Make sure that no water or other
liquids get into the housing.
NOTE! Risk of Damage!
Improper handling of the
tacker can cause damage to the
tacker.
− Do not use aggressive cleaning
agents, brushes with metal or
nylon bristles, or sharp or metallic
cleaning items such as knives,
metal sponges, and the like.
These can damage the surfaces.
Cleaning the tacker
− Clean the housing with a soft
cloth or brush.
Check the tacker
Regularly check the condition of the
tacker. Among other things, check
whether:
− the on / off switch (4) and the
trigger (2) are undamaged;
− The accessories are in proper
working order;
− the charging cable and the mains
plug (11) are undamaged.
If you notice any damage, you
must have it repaired by a
specialist workshop in order to
avoid hazards.
Purchase option for staples and
nails
61
17.06.19 10:00