Safety - Meister MET36ME Traduction Du Manuel D'utilisation Original

WARNING!
This indicates a dangerous situation
which, if not prevented, may result
in death or serious injury.
NOTE!
This warns of potential material
damage.
This symbol indicates
useful additional
information for use.
Declaration of conformity
(see chapter „Declaration
of Conformity"): Products
labelled with this symbol
meet all the applicable
Community Directives of
the European Economic
Community.
The symbol „GS" stands
for tested safety Products
ID 1419059505
that are labelled with this
symbol conform to the
requirements of the
German Product Safety
Law (ProdSG).
Important! Observe the
operating instructions!
Important! Operating
instructions for the
charger
The tacker and charger
are only intended for
interior use.
5459600-Akku-Tacker_man.indd 53
Products that are marked
with this symbol conform
to Safety Class II.
Micro-USB Charging
Socket
MIKRO
USB
The machine and the
charger may not be put
into the household
waste. Dispose of the
devices in an environ-
mentally friendly way, if
you wish to dispose of
them. Dispose of the
machine and the charger
at a local collection
point.
BJ: Year of construction
SN: Serial number
SN: XXXXX The first two underlined
numbers give the month
of manufacture.
3 – Safety
Intended Use
The tacker is intended only for pri-
vate use, for hobby and DIY appli-
cations for the following purposes:
• for stapling fabrics, leather, card-
board, foils and similar materials
onto a soft surface (e.g. pine
wood).
All other applications are expressly
excluded and are not valid applica-
tions of intended use.
53
17.06.19 10:00