Technical Information; Product Maintenance - Chauvet DJ KINTA FX Mode D'emploi

5. T
ECHNICAL
Product Dust build-up reduces light output performance and can cause overheating. To maintain
optimum performance, clean the product at least twice a month.
Maintenance
However, usage and environmental conditions contribute to increasing the cleaning frequency.
To clean the product, follow the instructions below:
Always dry the optical surfaces carefully after cleaning them.
Page 26 of 120
I
NFORMATION
Unplug the product from power.
Wait until the product is at room temperature.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the
external surfaces and fan vents.
Clean the optical panel (laser aperture) with a mild solution of glass cleaner or isopropyl
alcohol.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
Softly wipe any dirt or grime to the outside edges of the optical surface.
Gently polish the optical surface until they are free of haze and lint.
Kinta FX User Manual Rev. 2