Operation; Control Panel Operation; Menu Map; Auto And Sound - Chauvet DJ KINTA FX Mode D'emploi

4. O
PERATION
This product is not designed for continual use. Make sure there are regular breaks during operation to maximize the life
of your laser. Always disconnect the Kinta FX from power when not in use.
Control Panel
To access the control panel functions, use the four buttons located underneath the display.
When the product is on, the LED monitor on the rear panel will show the current operating mode

Operation

(Standalone or DMX). The product will retain the last saved settings when powered off.

Menu Map

Refer to the Kinta FX product page on www.Chauvetdj.com.com for the latest menu map.
Mode
DMX
Static Color
Auto
Speed
Sound
Manual Color
IR Function

Auto and Sound

Modes Defined

Kinta FX User Manual Rev. 2
Button Function
<MENU> Selects an operation mode or backs out of the current menu option
<UP> Scrolls up the list of options or selects a higher value
<DOWN> Scrolls down the list of options or selects a lower value
<ENTER> Activates a menu option or a selected value
Programming Steps
2-CH
9-CH
C--
P--
S--
SND
R001–R255
G001–G255
U--
B001–B255
W001–W255
SET
Program Effect
*1 All effects
*2 Beam and Strobe
*3 Beam and Laser
*4 Laser and Strobe
*5 Beam Only
*6 Strobes Only
*7 Laser Only
Description
–d511
d001
Sets DMX personality and address
–d504
d001
C001–C015 Selects Static Color
P001-007 Selects Auto Program Effect
S.00–S.99 Speed for Sound Mode and Auto Programs
SNd1-7 Selects Sound Active Mode Program Effects
Sets Manual Color choice and Strobe speed (slow to
F.00–F.99
fast)
ON
On/Off IR functions
OFF
Page 19 of 120