Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. T
ECHNICAL
Product
Maintenance
EZMiN™ Laser FX/RBX User Manual Rev. 3
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. To
maintain optimum performance, clean the product at least twice a month.
However, usage and environmental conditions contribute to increasing the
cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external surfaces and fan vents.
4. Clean the glass panel (laser aperture) with a mild solution of glass cleaner
or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning
tissue.
6. Softly wipe any dirt or grime to the outside edges of the glass.
7. Gently polish the glass surface until they are free of haze and lint.
Always dry the glass surfaces carefully after cleaning them.
Do not spin the fan using compressed air because you could damage it.
Do not open this product for cleaning or servicing.
Page 15 of 48
Publicité
Table des Matières
