Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Headrest
The headrest (12) is used to support your head during exercises that are done lying
face up. Fit the headrest by pulling the lock pin located at the back of the backrest
(2) and insert it into the location tube, adjust it to one of the three available positions
to suit your needs.
Important: Check that the lock pin is fixed securely before beginning any exercises.
STORAGE
1. Remove the foot plate (9), the leg extension (13) and the headrest (12).
2. Place the seat (1) and the backrest (2) into position 1A.
3. Pull the handle upward bringing the support feet in.
Important: Leave a space between the support feet to ensure better
stability.
4. Store the machine.
MAINTENANCE
Check and tighten all the parts on your unit every three months. If you are unsure
about the condition of any part, we recommend that you replace it with original
spare parts. The use of other spare parts may cause injuries or affect the
performance of the machine.
20
Publicité
Table des Matières
