Paradigm Defiance Série Manuel Du Propriétaire page 8

SAFETY WARNINGS AND
INSTALLATION IN BRIEF (cont'd)
Setting the Controls (Using LFE Input):
• Power Mode: Set the switch to 'Auto', 'On' or 'Trigger', depending
on your application.
• Download the Paradigm Subwoofer Control app (from the Google
Play Store or the Apple App Store).
• Using the app, adjust the following settings:
– Volume (level): Set at -14dB or twelve o'clock (straight up).
– Phase: Start with 0°.
– Low Pass Filter: Set to Bypass
• Use your processor/receiver's bass management system to adjust
subwoofer integration.
Line Level Input (Left/Right):
• Power Mode: Set the switch to 'Auto', 'On' or 'Trigger', depending
on your application.
• Download the Paradigm Sub Control app (from the Google Play
Store or the Apple App Store).
• Using the app, adjust the following settings:
– Volume (level): Set at -14dB or twelve o'clock (straight up).
– Phase: Start with 0°.
– Low Pass Filter: Set lower than the low-end frequency response
of your main speakers. If you are uncertain of your main speaker
low-frequency response, start with 80Hz.
Speaker Level Inputs (Left/Right):
• Power Mode: Set the switch to 'Auto', 'On' or 'Trigger' depending
on your application.
• Download the Paradigm Sub Control app (from the Google Play
Store or the Apple App Store).
• Using the app, adjust the following settings:
– Volume (level): Set at -14dB or twelve o'clock (straight up).
– Phase: Start with 0°.
– Use the Low Pass Filter and set to 80Hz.
5