Paradigm Defiance Série Manuel Du Propriétaire page 31

ANTHEM ROOM CORRECTION (ARC
(cont'd)
HOW TO USE ARC TECHNOLOGY
Professional Version
1. Download the latest version of ARC-2 software from www.anthemav.com
and install it. Follow the on-screen instructions.
2. Using the USB cables provided, connect one from the ARC
microphone to the PC and the other from the PC to the back of the
subwoofer.
3. Look for the icon on your desktop and launch the ARC program.
Follow the prompts on your computer screen to successfully run
the ARC software; the entire process should take approximately
15 minutes.
4. Hold the ARC microphone with your arm fully extended, the ARC
microphone tip must point towards the ceiling and it must be
positioned at ear level.
5. For best results, hold the microphone in 5 different positions around
the room.
NOTE: The recommended measuring positions should be located at
or just in front of the central seating position (see Diagram A). If your
"main measurement position" is against a wall, additional measurement
positions should be in front of the seating area. Vary the distance of
these positions relative to the wall by 1 foot or more from each other so
they are not all the same distance from the wall (see Diagram B).
E a r L e v e l
®
p a r a d i g m . c o m
)
28