Selecting The Menu Language - Sony VPL-VW12HT Mode D'emploi

Connecting the Projector / Selecting the Menu Language
When connecting a computer
Left side
CONTROL S IN VIDEO IN
PLUG IN POWER S VIDEO VIDEO
TRIGGER INPUT A
G/Y B/C /P R/C P
B B R/
REMOTE INPUT B
RS-232C G/Y B/C /P R/C P
B B R/
(FOR SERVICE USE)
to
monitor
output
Computer
a) When connecting INPUT A or INPUT B connectors on the
projector, you need conversion plugs (BNC t phono).
To connect a Macintosh computer
When connecting a video output connector that has a
two-line pin configuration, use the appropriate adaptor
for that type of connector (not supplied).
18
(GB)
SYNC/HD VD
R
SYNC/HD VD
R
a)
Conversion plugs
Monitor cable
SMF-400
(not supplied)
Speakers

Selecting the Menu Language

You can select the language to be used in the menu
and other on screen display. The factory setting is
ENGLISH.
4, 5, 6
3
LAMP/ TEMP/ POWER
COVER FAN SAVING
MENU
ENTER
1
Plug the AC power cord into the wall outlet.
2
Press the I / 1 key to turn on the power.
3
Press the MENU key.
The menu display appears.
PICTURE CTRL
CONTRAST: 80
BRIGHT: 50
RGB ENHANCER: 30
COLOR TEMP: HIGH
4
Select the icon of the SET SETTING menu, the
third one, using the M or m key, then press the ,
or ENTER key.
The SET SETTING menu appears.
SET SETTING
STATUS: ON
INPUT-A: COMPONENT
INPUT-B: COMPONENT
LANGUAGE: ENGLISH
POWER SAVING: OFF
SIRCS RECEIVER: FRONT&REAR
CINE MOTION: AUTO
2
ON/
STANDBY
INPUT
PATTERN LIGHT
VIDEO MEMORY
RESET
1
INPUT-A
INPUT-A