Control Panel • Functions - INVENTOR ΑΤΜ-25L Manuel D'utilisateur

8. CONTROL PANEL • FUNCTIONS
POWER
By pressing the "POWER" button the dehumidifier/air purifier turns ON or OFF. Once powered,
the digital display is active indicating the current settings.
• When desired humidity level is reached, the compressor automatically stops
and the fan keeps operating at the pre-selected settings.
OPERATION
The air purify mode remains always in function, indicated by the icon
of the unit. By pressing the OPERATION button you may select to operate as an Air Purifier
only or as an Air Purifier/Dehumidifier. When the dehumidify mode is on, the icon
shown on display.
• When the unit operates as an Air Purifier
refer only to the air quality. Under this operation no dehumidification takes
place.
• When the unit operates as a Dehumidifier & Air Purifier
on the display are referring to the room humidity. During this operation
dehumidification is on.
AIR QUALITY LED LIGHT
A LED indicator displays the air quality under various colorings.
• the GREEN led light ( 0 < PM2.5 ≤ 50 ug/m3) indicates great air quality.
During Automatic mode
automatically adjusts fan speed to Low (1).
• the BLUE led light ( 51 < PM2.5 ≤ 100 ug/m3) indicates fine air quality. During
Automatic mode
automatically adjusts fan speed to Medium (2).
• the RED led light (PM2.5 is ≥ 101ug/m3), indicates bad air quality. During
Automatic mode
automatically adjusts fan speed to High (3).
EN
, on the operation of the Air Purifier
, on the operation of the Air Purifier
, on the operation of the Air Purifier
, the indications on the display
+
, the device
, the device
on the monitor
is
, the indications
, the device
11