Control Panel • Functions - INVENTOR K3-10L Manuel D'utilisateur

6. CONTROL PANEL • FUNCTIONS
POWER
By pressing the "POWER" button the dehumidifier turns on or off.
• When set humidity level has been reached the unit's compressor will
automatically stop as soon as the humidity level drops 3%-5% under the set
humidity level. The fan will continue operating for a while and will stop as soon
as the humidity remains below the desired level.
• In the event of a power failure the unit has an Auto Restart function. Once
power is restored, the appliance will automatically restart at the preselected
settings prior to the power failure.
Mode
By pressing the "MODE" button, you can select among the below operations:
• For drier air press the Mode button to select 40% humidity level and the light
indicator will turn on.
• For ideal conditions in you room press the Mode button to select 50%
humidity level and the light indicator will turn on.
• To achieve low operating costs in a room with high levels of humidity press the
Mode button to select 60% humidity level and the light indicator will turn on.
• For constant operation of the dehumidifier, press the Mode button to activate
the Continuous function.
Cont.
Continuous function: the dehumidifier operates continuously when the drainage
pipe is attached, or until the water tank is full, extracting humidity from the air. When
this function is active the indicator will turn on and the device will work constantly,
disregarding the relative humidity of the room and the desired humidity level set.
EN
9