Control Panel • Functions - INVENTOR FRS-10L Manuel D'utilisateur

6. CONTROL PANEL • FUNCTIONS
POWER
By pressing the "POWER" button the dehumidifier turns on or off. The "POWER" button
and Display will turn on.
• When the room's humidity level reaches 3% -5% below the desired set
humidity level, the device compressor will automatically stop, while the fan
will continue to operate. Continuous fan operation contributes to energy
savings as the device identifies the relative humidity of the area, allowing
the compressor to operate much less in a 24-hour period.
• In the event of a power failure the unit has an Auto Restart function. Once
power is restored, the appliance will automatically restart at the preselected
settings prior to the power failure.
CONT.
Continuous function: the dehumidifier operates continuously when the drainage
pipe is attached, or until the water tank is full, extracting humidity from the air. When
this function is active the indicator will turn on and the device will work constantly,
disregarding the relative humidity of the room and the desired humidity level set.
• For drying clothes: place the dehumidifier in a small room and set nearby
the clothes rack. Keep doors shut and allow the dehumidifier to dry the
clothes.
• For special humidity conditions where big amounts of condensation need
to be extracted, such as extremely moist rooms.
• When immediate dehumidification is necessary such as in areas or rooms
not in use for an extended period of time, etc.
EN
Note: In order for this operation to be
cancelled press the "CONT." button once
again and the indicator will turn off.
17