Control Panel • Functions - INVENTOR P3F-WiFi25L Manuel D'utilisateur

6. CONTROL PANEL • FUNCTIONS
POWER
By pressing the "POWER" button the dehumidifier turns on or off. The Display will turn on.
• When set humidity level has been reached the unit's compressor will
automatically stop as soon as the humidity level drops 3%-5% under the set
humidity level. The fan will continue operating for a while.
• In the event of a power failure the unit has an Auto Restart function. Once
power is restored, the appliance will automatically restart at the preselected
settings prior to the power failure.
PADS
Humidity Set Control Buttons
The humidity level can be set within a range of 35% RH (Relative Humidity) to
85% RH (Relative Humidity) in 5% increments each time one of the relative buttons are
pressed, as long as no other functions (Cont. or Comfort) are in operation simultaneously.
• For drier air press the t pad to set a lower percent value (%).
• For damper air, press the u pad to set a higher percent value.
TIMER
Press the "TIMER" button to initiate the auto START and auto STOP function in combination
with the t / u buttons.
When the unit is off:
• Press the Timer pad to activate the AUTO START function. By pressing once
again the AUTO STOP function is activated.
• Press the t / u pad to change the AUTO time by 0.5 hour increments, up to 10
hours, or by 1 hour increments up to 24 hours.
• The time selected will be stored within 5 seconds and the main display will
automatically turn off.
EN
Note: This function cannot work simultaneously
with the "Cont." or Comfort functions activated.
9