INVENTOR ΑΤΜ-25L Manuel D'utilisateur page 14

• Low: When Low Speed is selected, indicated by number 1 on the digital display,
the operation is silent, and standard functioning conditions are applied.
• Medium: When Medium Speed is selected, indicated by number 2 on the digital
display, the fan is set at medium speed.
• High: When High Speed is selected, indicated by number 3 on the digital
display, the fan is set at maximum speed. This option is ideal for air purification
in areas with a larger air quality issue.
TIMER
Press the "TIMER" button to set up timer for automatically turn off.
• Any time this button is pressed, the set time is increased by 1h (hour), for
auto STOP of the device. This function offers the selection of when the device
automatically turns off, within a range from 1h to 9h (hours).
• Once the desired hour(s) selected, wait for 3 seconds without pressing
anything and the indication of timer
timer is activated.
• For auto STOP the device should be left continue its function.
SWING LOUVER
Press the Swing Louver button to activate/deactivate this feature.
• By pressing the "Swing Louver" button once, the swing indication is active
on the digital panel, informing that the swing feature is in operation. While
in operation the swing louver operates in such a manner allowing a multi-
directional air stream.
• By pressing the Swing Louver a second time, the louver can be stopped at a
desired angle. This option is selected for a direct air flow, ideal when drying
clothes, or for as desirable preferred position.
14
Adjustment of FAN SPEED is available only during Manual
mode.
In the event of a power failure the timer function is not
restored after power resumes.
will appear in the monitor to confirm that
EN