Combinable Functions; Child Lock Function; Operation Guide - INVENTOR COOL Mode D'emploi

Introduction for buttons on remote controller
Note:
Range of time setting is: 0.5~24h
■
The interval between two motions can't exceed 5s, otherwise the remote controller will exit setting
■
status.

Combinable Functions

■

Child lock function

■
When pressing the + and - buttons simultaneously the child lock function is activated-deactivated.
When the child lock function is activated, the LOCK indicator on the remote controller is lit. The
remote controller is then not responsive.
Temperature display switchover function
When in OFF status, by pressing the - and the MODE button simultaneously you may switch
between °C and °F.

Operation guide

1. Once powered, press ON/OFF button on remote controller to activate the air conditioner.
2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN
3. Press "+" or "-" button to set your required temperature. (Temperature can't be adjusted under
auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium and high speed.
9