Connecting To A Power Source - Toro Ultra 225 Manuel De L'utilisateur

5.
Important: The blower will not run unless the bottom
inlet cover is locked in place.
5
Operation
Important: This blower is intended for outdoor,
residential use only. Do not use it indoors or for
commercial or industrial purposes.
Connecting to a Power
Source
Use only a polarized (i.e., one blade is wider than the
other), UL listed (CSA certified in Canada) extension
cord recommended for outdoor use. A polarized plug
will fit in a polarized cord only one way. If the plug
does not fit fully in the cord, reverse the cord. If it still
does not fit, purchase a polarized extension cord. Do
not change the plug in any way.
Extension Cord Length
100 ft.
m- -5111
150 ft.
Note: Do not use an extension cord over 150 feet.
If you do not fully seat the extension cord on the
inlet plug, the loose plug could lead to
overheating and cause a fire, possibly burning
you or others.
Ensure that you fully seat the cord on the plug
and use the cord lock feature to secure the cord.
Important: Check the power cord frequently
during use for holes in the insulation. Do not use a
damaged cord. Do not run the cord through standing
water or wet grass.
3351-157
Minimum Wire Gage (A.W.G.)
16
14
Warning