Lehner Versand ST007 Mode D'emploi page 18

EN
Never immerse the main unit and the connecting cable in water
■
or other liquids and ensure that these components cannot fall
into water or become wet. There is a danger of electric shock!
Only use the water tank to supply water to the device. Do not
■
pour any liquids (e. g. oil or water) directly into the device or the
drawer or place a liquid-fi lled vessel into the drawer or cooking
chamber.
The device is not designed to be operated with an external
■
timer or a separate remote control system.
The device must always be switched off and disconnected
■
from the mains power when it is left unattended and before
transporting or cleaning the device.
Do not make any modifi cations to the device. Also do not
■
replace the connecting cable yourself. If the device, the con-
necting cable or the accessories of the device are damaged,
they must be replaced or repaired by the manufacturer, cus-
tomer service department or a specialist workshop in order to
avoid any hazards.
Follow the instructions in the "Cleaning and Care" chapter!
■
DANGER – Danger of Electric
Shock
■
Use and store the device only in
closed rooms. Do not use the device
in rooms with high humidity.
■
Should the main unit fall into water,
switch off the power supply imme-
diately. Do not attempt to pull the
device out of the water while it is
connected to the mains power! Have
the device checked by a specialist
workshop before putting it back into
operation.
■
Never touch the main unit and the
connecting cable with wet hands
when the device is connected to the
mains power.
■
Make sure that the steam which
emerges does not come into direct
contact with electrical devices and
equipment containing electrical
components.
16
WARNING – Danger of Fire
■
Do not operate the device in the
vicinity of combustible material. Do
not place any combustible materials
(e. g. cardboard, paper, plastic) on or
in the device.
■
Do not connect the device along with
other consumers (with a high watt-
age) to a multiple socket in order to
prevent overloading and a possible
short circuit (fi re).
■
Do not use any extension cables.
■
Do not insert anything into the ven-
tilation openings of the device and
make sure that they do not become
clogged.
■
Do not cover the device during
operation in order to prevent it from
catching fi re.