Packaging, Transportation And Storage - Kripsol KNG Manuel D'instructions

Ensure that you have selected the correct unit for the purpose for which it is intended
and that the condition, installation, commissioning and subsequent use of the equipment is
DIN Standard
4844-W9
correct. See chapter
Installation, repair and maintenance operations must always be carried out while the
unit is disconnected from the power supply.
DIN Standard
4844-W8
Safety elements or electrical connection/disconnection elements must not be activated
in the presence of humidity and particular care must be taken to ensure that the
DIN Standard
operator's hands, footwear or contact surfaces are dry.
4844-W8
The unit must not be moved or have its position corrected during operation.
Such tasks should always be carried out when the unit is stopped.
DIN Standard
4844-W8
Parts of the equipment that move during operation or may reach high temperatures
must be protected with grills or housings to prevent accidental contact with them.
DIN Standard
4844-W9
Electrical conductors or live parts must be equipped with suitable insulation.
Other metal parts of the unit must be connected to earth.
DIN Standard
4844-W8
All necessary spares must be the manufacturer's original spare parts or those
recommended by the manufacturer. The use of other spare parts, or originals rectified
by third parties, is not permitted and will release the manufacturer or distributor from
DIN Standard
all liability.
4844-W9
DANGER
DANGER

3. PACKAGING, TRANSPORTATION AND STORAGE

The manufacturer supplies the equipment protected with the appropriate
ATTENTION
packaging, so as to prevent any damage during transport or storage that may
prevent its correct installation and/or operation.
On receiving the unit, check the following points:
ATTENTION
- The condition of the outer packaging. If it shows significant signs of damage, formally report it to the
person making the delivery.
- Check the condition of the contents. If the contents present imperfections that will presumably prevent
the correct operation of the unit, formally report the situation to the supplier within a maximum period of
8 days from receipt.
Storage conditions must be such that they will guarantee the good state of
ATTENTION
repair of the unit. It is especially important to avoid storing the unit in markedly
humid environments or in conditions where brusque temperature changes may occur (resulting
in condensation).
"1.1.TECHNICAL
This apparatus is not designed to be used by people (including children) with
reduced physical, sensorial or mental capabilities, or those lacking experience
or knowledge, unless they have received appropriate supervision or instruction
on the correct use of the apparatus from a person responsible for its safety.
This apparatus is not a toy.
Ensure that children do not play with it.
CHARACTERISTICS".
24