Automatic Cpu Processes - Virutex EB140 Mode D'emploi

N - Real temperature reading
Displays the real glue temperature at all times.
O - Machine status indicator LED.
(red-green)
While the glue is being heated, the LED is red. When the set
temperature is reached on screen M (-5ºC), three beeps are
heard, the LED changes to green and the blue pilot light G
simultaneously turns on.
P - Current impulse indicator LED
The elements that heat the glue tank are operating intermit-
tently. The LED remains on as long as the elements receive
the current.
N P
O
J

6.1.1 Automatic CPU processes

The machine is equipped with two CPUs that control the fo-
llowing automatic machine functions:
1 - The glue temperature may be set at between 160º and
210°C on screen M.
2 - Once the glue reaches 150°C, the glue tank motor starts
up, but the machine will still not be operational until it rea-
ches the set operating temperature.
3 - If the machine is operational, but no work has been per-
M
L K
formed for half an hour, the machine automatically stops,
the message "STOP" appears on screen and LED O blinks in
red.
To restart the machine, simply press button C and wait for it
to become operational once more.
4 - If you have finished work and you forget to turn off the
machine, after 1/2 hour it will automatically switch to idle
status (110ºC), and the message "fun1" will appear on screen
D C
M. At this temperature, the glue is kept in good condition. To
restart the machine, simply press button C and wait for it to
0 I
become operational once again.
An hour and a half after the last work is performed, the ma-
chine automatically stops and the word "Stop" appears on
screen.
5 - During the board banding process, the feeder and profi-
ling machine motors stop 15 seconds after the board passes
the start microswitch.
The idle temperature is 110ºC, which prevents the glue
from deteriorating too quickly.
100 - EB140 / Operating instructions