4
If the Vehicle Shoulder
Belt falls outside the
peach zone shown in
image (28), use the
Shoulder Belt Positioning
Clip for proper placement
of the Vehicle Shoulder
Belt. Refer to Shoulder
Belt Positioning Clip.
5
Route the Vehicle
Shoulder Belt through the
Shoulder Belt Positioning
Clip. Adjust the Shoulder
Belt Positioning Clip
by pulling down on the
strap so the Shoulder
Belt Positioning Clip is
slightly above the child's
shoulder as shown (29).
The top of the child's ears
should be AT or BELOW the
top of the vehicle seat back
or the vehicle's headrest.
Use of Shoulder Belt
Positioning Clip
1
The Shoulder Belt
Positioning Clip must be
attached to the horizontal
bar located on either
side of the booster seat
bottom. (30)
28
29
30
AACE instructions
26