Nuna aace Mode D'emploi page 26

Installing without Lower
Anchor Connectors
Place the back of the booster against the back
of the vehicle seat back.
In the No Back Booster mode, the recline
function cannot be used.
Installing with Lower Anchor Connectors
1
Remove the seat back by reversing steps
shown in "Seat Assembly."
2
Connect the Lower Anchor Connectors to the
vehicle's Lower Anchors. See "Use of Lower
Anchor Connectors."
3
While holding the Lower Anchor Release
Lever, adjust the booster until it is in contact
with the vehicle's seat back. Refer to "Use of
Lower Anchor Connectors."
AACE instructions
24