Nuna aace Mode D'emploi page 22

Use with Lower Anchors
and Recline Feature
The booster has a recline
feature to best fit your vehicle
and provide maximum
comfort to your child.
1
Place vehicle seat back in
normal upright position.
2
Connect booster to
vehicle Lower Anchors
(see Use of Lower
Anchors).Ensure bottom
of booster is in full contact
with vehicle seat. (22)-1
3
Adjust the seat bottom by
holding the Recline Lever
and moving the seat in
or out to obtain desired
recline as shown in (22)-1.
4
Ensure the back of the
booster is in contact with
vehicle seat as shown in
(22)-2.
5
Adjust or remove vehicle headrest as needed
to remove interference.
If you remove your vehicle headrest, be sure
to stow it in a secure place; check your vehicle
owner's manual.
Warning! Never use booster when reclined
beyond the recline position 2. (23)
21
2
1
22
1
2
23
AACE instructions
1
20