5.2
DOOR OPENING AND CLOSING
5.2
DOOR OPENING AND CLOSING
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
FIRE VIEWING
When opening the fire viewing door, a simple procedure must
When opening the re viewing door, a simple procedure must
be followed in order to not damage the door. First open the
be followed in order to not damage the door. First open the
valve control door. Next open both side doors fully. Pull the
valve control door. Next open both side doors fully. Pull the latch
latch handles towards you and release each catch. The door
handles towards you and release each catch. The door may now
may now be safely opened. To close the door, repeat in reverse
be safely opened. To close the door, repeat in reverse order.
order.
There may be instances that require adjustment of the door
There may be instances that require adjustment of the door latches to ensure a tighter seal. To do this simply
latches to ensure a tighter seal. To do this simply loosen and tighten each catch until both latches snap closed
loosen and tighten each catch until both latches snap closed when securing the door.
when securing the door.
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
DOOR
SIDE
DOOR
WARNING
!
WARNING
!
RISK OF FIRE!
RISK OF FIRE!
VALVE CONTROL DOOR
CATCH
CATCH
31
31
EN
72.4
CATCH /
HANDLE
SIDE
DOOR
HANDLE
HANDLE
W415-1430 / B / 07.31.18
W415-1430 / 01.13.15
EN