User Manual
Commands
Command
Process
Select PC Port
Right-click the KVM Switching Software icon to open the operation menu, then
select whichever device that is available for switching.
Next Lower PC
Right-click the KVM Switching icon to open the operation menu, then select
Port
whichever device that is available for switching.
Next Higher PC
Right-click the KVM Switching icon to open the operation menu, then select
Port
whichever device that is available for switching.
Define Hotkey
Right-click the KVM Switching icon to open the operation menu, and then select
Preceding
Settings (Windows) / Configuration Dialog Box (Mac OS).
Sequence
Auto scan
Right-click the KVM Switching Software icon to open the operation menu, then
select Start Auto-Scan to activate auto scanning.
Auto scan with
Right-click the KVM Switching Software icon to open the operation menu, then
Programmable
select a range of time within the Auto-Scan Period.
Delay Time
Stop Auto scan
While auto scanning, right-click the KVM Switching Software icon to open the
operation menu, and then select Stop Auto-Scan to de-activate auto scanning.
Keep in Dock
Right-click the KVM Switching Software icon to open the operation menu, and then
select "Keep in Dock".
(Mac Only)
Open at Login
Right-click the KVM Switching Software icon to open the operation menu, then
select "Open at login".
(Mac Only)
Fix Audio Port
Right-click the KVM Switching Software icon to open the operation menu, then
check the box "Fix Audio Port at PC" and select the desired PC port.
3. Keyboard Hotkey Switching (Windows & Mac OS)
Each keystroke hotkey sequence must be pressed within two seconds. It is not possible to switch to a
port with no active device connected.
For Windows, the following key sequence for switching is preset: "Scroll Lock + Scroll Lock". Additional
hotkeys like "CTRL ALT + *" can be configured via the Configuration menu in the software as described
above.
For Mac, please define the hotkeys via the Configuration menu as described above.
English