STEP 5
HANDRAIL/CONSOLE AND WATER BOTTLE ASSEMBLY
Pass the wires coming out of the Control Tube (E) through the Handrail Tube (B). There
should be 5 wires. Attach the Handrail Tube (B) to the Control Tube (E) and tighten with
Hex Screws (K02) Spring Washers (K03) and Washers (K04).
Attach the Water Bottle Holder (K) onto the Control Tube (E) and tighten with Phillips
Screws (K07). Then place Water Bottle (L) into the holder.
E
19