Assembly - CAPITAL SPORTS Durate Mode D'emploi

EN
32

ASSEMBLY

Fix the front stabilizer (3) and Rear stabilizer (2) on the main frame (1)
with eight sets of flat washers (17), screws (18) tightly. Note: the front
stabilizer is with transport wheel.
Loosen the adjusting knob
(10) and pull it out first
before sliding the seat
support post (4) into the
seat support post housing
on the main frame, and align
holes for your desired height
,then release the adjusting
knob and tighten it properly.
Then fix the seat (5).
1
2