Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
operation
extra functions
culisensor
1
Select an oven function.
You can use the
culisensor with the
Turbo, Infra and Infra-
2
Set the oven temperature required using the + and -
with-fan functions.
buttons.
Preheating the oven is advisable when roasting.
3
Stick the tip of the needle into the middle of the piece of
meat.
The tip must not touch bone.
4
Slide the meat into the oven.
5
Push the sensor's plug into the socket in the right-hand
oven wall.
55 appears as the standard internal temperature. If CU
appears in the display, an unsuitable oven function has
standard internal
been selected.
temperature
6
Set the required internal temperature using the + and -
buttons (see baking and roasting tips on page 19).
The internal temperature can be adjusted in steps of 1 °C.
7
Press start.
The internal temperature measured and the time elapsed
appear in the display.
GB 10
The culisensor is a handy tool when
roasting large pieces of meat. You can
always be sure that the meat is cooked
enough for your wishes.
The oven gives a signal and switches off when the
internal temperature set has been reached. You stop the
signal by opening the door. You can also stop it with the
stop button or the timer buttons.
Using the temperature selector button °C you can select the
display to be changed. You can adjust the display that blinks.
childproof lock
The appliance is fitted with a childproof lock. When the
childproof lock is switched on, the controls do not work; the
oven door can still be opened, however. You can only switch
the child lock on when the oven is not in use.
childproof lock
locking
Press stop for 5 seconds until the key symbol lights up.
You will hear a beep twice. The key symbol lights up.
unlocking
Press start for 5 seconds until the key symbol goes out.
The key symbol disappears.
adjusting the standard oven temperature
When an oven function has been selected, the oven chooses
a standard oven temperature itself. You can adjust this.
1
Select an oven function.
selecting function
The standard oven temperature appears.
2
Set the standard temperature required using the + and -
buttons.
3
Again press the button for the function selected and keep
adjusting standard
this button depressed until you hear a signal.
temperature
operation
extra functions
GB 11
Publicité
Chapitres
Table des Matières
