Extra Functions - Atag OX611T Mode D'emploi

operation
switching on
fast preheat
With the turbo function, the infra function and the infra-with-fan
function, you can select fast preheat. The oven is then at
temperature extra fast. As soon as the oven is at temperature
fast preheat you will hear a signal and the fast preheat switches off
automatically.
The oven continues with the function set.
If, after preheating the oven or during the cooking process,
you have not yet set a cooking time but you now decide that
you do want to set a cooking time after all, you must first
press the time selector button
as described on page 7.
switching off
Press stop once to interrupt the process.
The settings are retained, and so you can change them if
desired.
You can erase the settings by pressing stop twice.
stop
delaying the start time/setting the end time
You can delay the time at which the oven switches on. Put a
dish in the oven, set the cooking time and the time at which
the dish should be ready.
The oven calculates the start time itself and switches off
cooking time automatically when the cooking time has elapsed.
end time
1 Select an oven function by pressing the appropriate
symbol.
The light above the function selected comes on.
The standard oven temperature appears in the display.
selecting a function The cooking time blinks.
GB 8
. Then set the cooking time
2 Set the temperature required using the + and - buttons.
The temperature can be adjusted in steps of 5 °C.
setting the
temperature
3 Set the cooking time using the + and - buttons.
setting the time
4 Press the time selector switch
Both the cooking time and the earliest possible end time
appear.
Press the time
selector button and 5 Set the end time required using the + and - buttons.
set the end time.
6 Press start.
The oven light goes out.
The time of day and the end time appear in the display.
The oven calculates for itself when it should switch on.
The oven gives a signal and switches off once the preset
end time has been reached. You stop the signal by
opening the door. You can also stop it using the stop
button or the timer buttons.
To change the settings, such as the oven temperature and
the end time, first press stop. The current settings are
displayed.
Using the time selector button
to change. You can alter the display that blinks.
NB: Make sure that both the cooking time and the end time
are displayed before pressing start. If the end time is not
visible in the display, it has been erased.
operation

extra functions

.
, you can select the display
GB 9