Panasonic WX-CC411 Manuel D'utilisation page 17

Lane A order post microphone volume display
[Outside]
The volume level of the lane A order post microphone is
displayed.
Lane A kitchen microphone volume display
[AUX]
The volume level of the lane A kitchen microphone is
displayed.
Lane A beep tone volume display [Beep]
The volume level of the lane A beep tone is displayed.
Lane A line input volume display [Line In]
The volume level of the lane A line input is displayed.
Lane A line output volume display [Line Out]
The volume level of the lane A line output is displayed.
Lane A order post microphone ON/OFF display
[Out Mic ON/OFF]
The setting that determines whether to output the voice
of the lane A order post microphone to the lane A kitchen
speaker is displayed.
Lane A kitchen microphone ON/OFF display
[AUX Mic ON/OFF]
The setting that determines whether to output the voice
of the lane A kitchen microphone to the lane A kitchen
speaker is displayed.
Lane A talk ON/OFF display
[TALK ON/OFF]
The setting that determines whether to output the talk
voice to the lane A kitchen speaker is displayed.
Note
"Talk" refers to communications between the
customers and store personnel.
Lane A beep tone ON/OFF display
[Beep ON/OFF]
The setting that determines whether to output the beep
tone to the lane A kitchen speaker is displayed.
Lane A paging ON/OFF display
[PAGE ON/OFF]
The lane A paging setting is displayed.
Note
"Paging" refers to communications among store
personnel.
Lane A V/Det Override ON/OFF display
[V/Det Override ON/OFF]
The status of the lane A V/Det Override is displayed.
Note
"V/Det Override" is a function that sets the vehicle
detectors virtually to ON and keeps both the order
post microphone and speaker in the ON setting.
Security Alert screen
The Security Alert screen appears when the [Security Alert]
button on the Setting Information screen is touched.
Cause and Initiation time
The cause of a security alert that has occurred and the
initiation time are displayed.
[F Button] : Sent from the store personnel who have
All-In-One Headsets or Belt Packs.
[Alert 1 to 4] : Sent from alert input 1 to 4.
Clear button [Clear]
This is touched to forcibly clear the Security Alert.
Stop button [Stop]
This is touched when the Alert Message for the Security
Alert is to be stopped.
This appears when "Alert message playback" has been
set for operations to be performed when a Security Alert
has occurred.
17