Inlet Filter - Hoover Commercial HUSHTONE CH54113 Mode D'emploi

WARNING
OR SERVICING. DO NOT OPERATE VACUUM WITHOUT BOTH INLET FILTER AND FINAL FILTER IN PLACE.

Inlet Filter

The inlet filter protects the motor from damage.
1
If the filter becomes dirty, pull
off the grill and lift out the filter.
Hand rinse in cold water under
low pressure. Let filter dry for 24
hours. Reposition dry filter and
snap grill into place.
REPLACEMENT FILTER
Replace Inlet filter every 6 months to keep vacuum running at peak performance.
Part No. 440007774
19
TO REDUCE THE RISK OF PERSONAL INJURY, UNPLUG VACUUM BEFORE CLEANING