Accessories; Cleaner Maintenance; Filter Maintenance - Hoover DINAMIS S 9040 Manuel D'utilisation

AccessoRIes

Please see the model specification on the packaging label for inclusion of accessories
to individual models. All accessories can be purchased separately from Hoover. (See
Hoover Spares and Consumable section).
All accessories can be fitted to the end of the hose or the end of the telescopic tube.
Parquet Caresse Nozzle* – For parquet floors and other delicate floors.
Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deepcleaning on textile
surfaces and other hard to clean areas.
important: Do not use the mini turbo nozzles on rugs with long fringes, animal hides
and carpet pile deeper than 15mm. Do not keep the nozzle stationary while the brush
is rotating.

cLeAneR MAIntenAnce

Removing and replacing the dust bag
1. switch off the product.
2. the hose connector must be removed before the dust bag can be removed.
3. Release the securing latches and remove the top cover.
4. the dust bag collar is removed by pulling the collar vertically, for hygiene the bag
collar has a closure feature to contain the dust, ensure this is closed.
5. fit a new bag by sliding the collar into the slots inside the tank, ensuring the collar
closure is at the top. [3]
Emptying the liquid collection tank (model specific)
1. switch off the product.
2. Release the securing latches and remove the top cover.
3. Empty the liquid to a suitable source.

Filter maintenance

1. Both filters can be washed with warm soapy water but must be dried completely
before re-use, Hoover recommend a period of 24 hours.
2. To remove the pre-motor filter the locking component by rotating anti clockwise,
then the filter is free to be removed. [4]
3. To replace slide the filter to the frame and rotate the locking component
clockwise.
*Certain models only
Dinamis im-4langs.indd 6
6
gB
29/10/2008 10:59:27