Eschenbach mobilux DIGITAL Touch HD Mode D'emploi page 34

Setting the line guide function
After calling up this function, you can set the the reading line or reading bar (shadow bars that darken the upper and
lower part of the display black). Tap on the
is displayed in front of the current live image, you can move this as required using the
are displayed at the top and the bottom of the display instead of the reading line, you can adjust their size as required
using the / buttons.
Update firmware
If you call up this function, the firmware version currently installed on the appliance is displayed on the left as the "Cur-
rent Version", and the firmware version to be installed is shown on the right as the "Update Version". To update the read-
ing appliance firmware, tap the
To update the software, the software version to be installed must have been previously copied onto the SD card.
icon to switch between reading line and reading bar. If a red reading line
icon, to cancel the process, tap the
- 34 -
/ buttons. If shadow bars
icon.