dirna Bergstrom bycool green line INTEGRAL POWER Instructions De Montage page 15

INTEGRAL POWER
Connect the other end of the supplied cable in
8
position (+) only with the engine started up or
through the (+) ignition key.
Connect the upper power cable in the rear of
9
the unit.
Connect the lower power cable (A) to the
10
battery and place cable joint hazard stickers in
a visible place (B).
Important: When connecting the cables, leave
!
suitable distance in order to prevent breakage
when the vehicle moves.
Important: Given the complex electronic
!
regulation system in the unit, the current
connection must be made directly to the
vehicle's battery (if this is not possible, contact
dirna Bergstrom, s.l.).
Important:
!
(220AA63071) before starting up.
Check the user
9
B
10
manual
15
EN
®
A