Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The assembly of the dispersion tool takes place in reverse sequence.
NOTICE
Spare parts order:
Spare parts diagram see front page.
For orders of spare parts please specify the serial number on the shaft
tube, the type of dispersion tool and the designation of the spare part.
Repair:
Please send the dispersion tool for repair only after it has been
cleaned and is free from any materials which may constitute a
health hazard.
For repair, please request the "Decontamination Certificate" form IKA
or use the download printout of it from IKA
If you require servicing, return the instrument in its original packaging. Stor-
age packaging is not sufficient. Please also use suitable transport packaging.
In accordance with IKA
months. For claims under the warranty please contact your local dealer.
You may also send the machine direct to our works, enclosing the delivery
invoice and giving reasons for the claim. You will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to faults
resulting from improper use or insufficient care and maintenance contrary
to the instructions in this operating manual.
Working range
Stator/Rotor (Ø)
Gap between rotor and stator
Max. allowable speed
Max. circumferential speed
Min./max. immersion depth
Material in contact with medium
pH range
Suitable for solvents
Suitable for abrasive substances
Max. working temperature
Sterilization methods
Working range vacuum
Ultimate fineness, suspensions μm
Ultimate fineness, emulsions
Subject to technical changes!
The rotor must not be tightened too strongly, other-
wise the thread will be damaged.
Warranty
warranty conditions, the warranty period is 24
®
Technical Data
ml
10 - 1500 50 - 2000 100 - 2000 10 - 1500 50 - 2000
mm
18/12.6
mm
0.3
rpm
m/s
16.5
mm
FFKM and PTFE (conform to the FDA, Food and Drug
ºC
mbar
10 - 50
μm
1 - 10
website: www.ika.com.
®
25/17
25/18
0.5
0.5
25000
22.2
23.6
40/185
Administration rules), AISI 316L
2 - 13
Yes
No
150
all meththods (except the ball bearing)
100
15 - 50
5 - 25
1 - 10
1 - 5
18/13.4
25/20
0.25
0.5
17.5
26.2
10 - 50
15-50
1 - 10
1 - 10
8
®
Publicité
Table des Matières
