j With horizontal louvers opened 30° from the vertical plane.
Mounting heights are maximum for heaters operating at standard conditions, Heights listed for Downward Deflector Hoods are with deflectors in fully-opened
position. Refer to Figure 4.2 for correction of mounting heights under other operating conditions. Maximum mounting height will be reduced as entering air
temperatures exceed 60°F.
Figure 4.2 - Maximum Mounting Heights Correction Factors
2.6
2.4
2.2
2
1.8
1.6
1.4
1.2
1
0.8
0.6
90
100
These correction factors are to be used as multipliers to correct the maximum recommended mounting heights of unit heaters when operated with water at other than