Important - GE ZBD9900RII Instructions D'installation

Lave-vaisselle encastré
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

LEVEL DISHWASHER

IMPORTANT

dish rack operation, wash performance and door operation.
The dishwasher must be leveled left to right and front to back.
This assures the dish racks will not roll in or out on their own,
close without hitting the side of the tub.
lower rack track.
four legs on the bottom of the dishwasher.
centered left to right and front to back. Also, the dishwasher
door should close without hitting the side of the tub.
1. Loosen the mounting screws on the dishwasher's
two front steel feet using a 5/8 inch (16mm) open-
ended wrench. Screw the mounting screws down
2. Adjust the height of the dishwasher by turning
the front steel feet with your hands. Leave enough
space to adjust them later.
12
Dishwasher must be level for proper
Tip: Prevent unnecessary service charges. Verify dishwasher
is leveled.
Pull the dish racks half way out . They should stay put. Open
without hitting the side of the tub. If the racks roll on their own,
or the door hits the side of tub, re-level the
dishwasher.

Publicité

Table des Matières
loading

Table des Matières