Custom Panel - GE ZBD9900RII Instructions D'installation

Installation Preparation
DISHWASHER CAVITY MEASUREMENTS
90°
2-4"
50 -105 mm
* Actual width of Dishwasher allows for
installation in a 23-5/8" wide cutout.
If optional Stainless Steel door panel
(ZXSS9900) is used, the cutout MUST be
24".
NOTE: A 24" cutout may require additional
trim work for the inside of the cutout for a
Dishwasher door shown
without custom panel or
panel kit
Cable Hole
1-1/2" Max DIA.
44 mm DIA.
* W = 24"
W = 610 mm
Make sure the edges of the cable
hole are even to avoid damage to
the drain and supply hoses and the
electric cable.
34-1/4 to 36-1/8"
870-920mm
3/4" thick
19 mm
** Height must be 28-3/8" MIN. - 31-1/2"
heights.
*** Custom panel must have 1/8" min.
cabinet cutout.
** 28-3/8" to 31-1/2"
721-800mm

CUSTOM PANEL

3