Perform Calibration - SilverCrest SHM 600 A1 Mode D'emploi

Perform calibration

NOTICE
► Perform a calibration only if the white balance needs to be
reset. A white balance is recommended if it should be that
the lightest point in scanned images, which in reality should
be white, in fact appears in a shade of grey.
GB
♦ Place the appliance on the paper supplied for white balance cali-
bration then switch the appliance on with the button /SCAN
♦ Press and hold the button C/BW
/SCAN
the indicator for the SD card
memory is deleted. Subsequently, the LED SCAN
LED ERR
NOTICE
► The documents/pictures extant on the Micro-SD memory card
will be retained even after the deletion of the internal memory.
♦ Do not move the appliance until the LED ERR
The LED SCAN
♦ Now begin to scan the paper by moving the appliance over
the white paper until the LED SCAN
appliance backwards if necessary).
♦ The calibration process is fi nished. Switch the appliance off with
the button /SCAN
72
to switch into calibration mode. In the display
glow.
continues to glow.
.
Handling and operation
and then press the button
will blink until the internal
extinguishes (push the
.
and the
extinguishes.
SHM 600 A1