Warning Display; Before The First Use; How To Make Bread - Klarstein 10009348 Mode D'emploi

1. If the display shows "H HH" after you have pressed START/STOP button, the temperature inside
is still too high. Then the program has to be stopped. Open the lid and let the machine cool down
for 10 to 20 minutes.
2. If the display shows "E E0" or "E E1"after you have pressed START/STOP button, the temperature
sensor is malfunction please check the sensor carefully by Authorized expert.
The appliance may emit a little smoke and a characteristic smell when you turn it on for the fi rst time.
This is normal and will soon stop. Make sure the appliance has suffi cient ventilation.
1. Please check whether all parts and accessories are complete and free of damage.
2. Clean all the parts according to the section "CLEANING AND MAINTENANCE".
3. Set the bread maker on BAKE mode and bake empty for about 10 minutes. Then let it cool down
and clean all the detached parts again.
4. Dry all parts thoroughly and assemble them, the appliance is ready for using.
1. Place the bread pan in position, then turning it in clockwise until they click in correct position. Fix
the kneading blade onto the drive shaft. It is recommended to fi ll hole with heat-resisting
margarine prior to place the kneading blade to avoid the dough sticking the kneading blade, also
this would make the kneading blade be removed from bread easily.
2. Place ingredients into the bread pan. Usually the water or liquid substance should be put fi rstly,
then add sugar, salt and fl our, always add yeast or baking powder as the last ingredient.
3. Make a small indentation on the top of fl our with fi nger, add yeast into the indentation, and make
sure it does not come into contact with the liquid or salt.
4. Close the lid gently and plug the power cord into a wall outlet.
5. Press the Menu button until your desired program is selected.
6. Press the COLOR button to select the desired crust color.
7. Press the LOAF button to select the desired size. (700g or 1000g)
8. Set the delay time by pressing Time button. This step may be skipped if you want the bread
maker to start working immediately.
9. Press the START/STOP button for approx. 1.5 seconds to start working.
10. For the program of BASIC, WHOLE WHEAT, FRENCH, QUICK, SWEET, CAKE, ULTRA-FAST and
HOME-MADE beeps sound will be heard during operation. This is to prompt you to add
ingredients. Open the Lid and put in some ingredients. It is possible that steam will escape
through the vent in the lid during baking. This is normal.
11. Once the process has been completed, 10 beeps will be heard. You can press START/STOP button
for approx. 1.5 seconds to stop the process and take out the bread. Open the Lid and while using
oven mitts, turn the bread pan in anti-clockwise and take out the bread pan.
19

WARNING DISPLAY

BEFORE THE FIRST USE

HOW TO MAKE BREAD