Klarstein 10009348 Mode D'emploi page 16

KNOW YOUR BREAD MAKER
INTRODUCTION OF CONTROL PANEL
(The silkscreen is subject to change without prior notice.)
After power-up
As soon as the bread maker is plugged the power supply, a beep will be heard and "1 3:00" appears
in the display. But the two dots between the "3" and "00" don't fl ash constantly. The "1" is the default
program. 1000g and MEDIUM will appear on LCD. They are default setting.
Start/stop
For starting and stopping the selected baking program
To start a program, press the "START/STOP" button for approx. 1.5 seconds. A short beep will be heard
and the two dots in the time display begin to fl ash and the program starts. Any other button is inactivated
except the START/STOP, LIGHT, and PAUSE buttons after a program has begun.
To stop the program, press the "START/STOP" button for approx. 1.5 seconds, then a beep will be heard,
it means that the program has been switched off .
16