Electrical Connection - Franke FTU 3807 W Mode D'emploi

ELECTRICAL CONNECTION

• Connect the hood to the mains through a twopole
switch having a contact gap of at least 3 mm.
• Open the lighting unit by pulling on the notch.
• Remove the filters one at a time by pushing them to-
wards the back of the group and pulling down at the
same time.
• Being sure that the connector of the feeding cable is
correctly inserted in the socket placed on the side of
the fan.
• Connect the control connector Cmd.
• Connect the Spotlights connector Lux to the socket
provided behind the lighting unit cover.
• Replace the filters, make sure that the handle is visi-
ble on the outside, and the lighting unit.
EN
Lux
Cmd
2
21
1