Electrical Connection - Franke ARTISAN RB Serie Mode D'emploi Et D'entretien

ELECTRICAL CONNECTION

Connect both green ground wires (from exterior blower motor
and from 120-volt supply wiring) under the unused green ground
screw.
120-volt supply wiring:
• Connect 120-volt black supply wire to black hood liner wire
with a twist-on connector.
• Connect 120-volt supply white wire with to white hood liner
wire with a twist-on connector.
Exterior blower motor wiring:
• Connect the black blower motor wire to the blue hood liner
wire with a twist-on connector.
• Connect white blower motor wire to brown hood liner wire
with a twist-on connector.
• Replace wiring box cover .
10.Insert the screw through the support and thread into the hood liner holes. Tighten screw se-
curely.
11.Reconnect the power and Reinstall filters.
12.Install the damper 10 ø 6" and fix the duct in position using sufficient pipe clamps (not sup-
plied).
EN
All manuals and user guides at all-guides.com
10
black
green green
wire
ground ground
(from
screw wires
white
blower)
wires
twist-on
connector
brown wire
black
(from hood
wires
blue wire
(from hood
exterior
blower
power
wiring
hood liner
supply
wiring
cable
white
wire
(from
blower)
liner)
liner)
1
11
1