MVP AXIS AX-CL06M CL06D Mode D'emploi page 17

CONTROL PANELS – MECHANICAL FOR COMBI OVENS
TIMER ADJUSTMENT
When the manual option is selected, the oven always stays on until
the operator turns it off.
When a certain value is selected, the oven stays on for the set
amount of time (maximum value 120 minutes).
THERMOSTAT LIGHT
This light is on when the oven heating elements are working and
therefore the internal temperature of the cooking chamber is lower
than the value set by means of the thermostat knob.
When the light goes off it means that the heat is off and that the
cooking chamber has reached the set temperature.
TEMPERATURE ADJUSTMENT
This adjustment can be used to select the desired cooking
temperature, from a minimum value of 200°F up to a "MAX" value
(corresponding to approximately 540°F)
STEAM LIGHT
When this light is on, it means that water is flowing inside the
cooking chamber in order to obtain steam.
This occurs regardless of the temperature (the operator is
responsible for checking that the temperature is high enough for the
cooking to take place correctly).
STEAM/MOISTURE CONTROL
This knob is used to activate the steam function. It can be adjusted
from minimum to maximum by turning the knob in a clockwise
direction.
ATTENTION: So that the steam function can operate satisfactorily,
the temperature needs to be set to at least 200°F.
Furthermore, for proper cooking you nee to pre-heat the oven to the
desired temperature before activating the steam supply.