Pre-Installation Requirements - glass 1989 NOOR STEAM-S Mode D'emploi

personnel.
Do not remove the sticker from the product!
Figure A
WARNING.
Read the manual carefully in all its parts before using the
product.
considered suitable without notice or replacement.
manufacturer's name) are contained in the silver data plate
of testing.
clean, to avoid slips or falls entering or editing the product
itself.
when using soaps, shampoos, clearing detergents, etc..
hot. Use water with a maximum temperature of 38°C.
and who have pacemakers.
people or pregnant women should consult a doctor before
using the product.
affect heart beat, blood pressure and circulation.
unconsciousness.
given appropriate supervision or instruction concerning use
of misuse.
appliance.
All measurements are in mm.

PRE-INSTALLATION REQUIREMENTS

the mixer.
150 kPa (1,5 bar)
350 kPa (max 3,5 bar)
max 60°C
installation requirements) is supplied in all versions except the
manual version.
the relevant standards.
GROUNDWIRE.
EQUIPOTENTIAL CONNECTION.
The equipment must be connected to the equipotential
found in the product.
The following accessories
manufacturer) are re uired for installation:
kit and no other types of piping must be used.
shower enclosure drain siphon (connection via Ø 40 hose).
ROUTINE AND
SPECIAL MAINTENANCE
Use water up to a maximum of 60°C to maintain the shine of the
sponges, metal pads, solid and liquid detergents containing
abrasive substances, alcohol, acids for domestic use, acetone
or other solvents that can damage the surface.
13
EN
C.P.
(not supplied by the
pipes provided in the