Radiatori 2000 PIANO II 600/3 Guide Rapide page 39

- To set the programmable time sequence for "Chrono" mode, press the [+] key until the
words Pr8 or Pr9
(Programming) appear on the screen.
- Press the [Prog] key to enter the mode.
- You can now set a timeline for each day of the week.
- From day 1, select the desired sequence with the [+] and [-] keys to select, for each hour,
between the "comfort" temperature button (solid bar) [+] and the "Night temperature button
"[-] (empty bar). Press [Prog] to confirm the setting of the first day, repeat the same procedu-
re for the remaining 6 days of the week.
OPEN WINDOWS DETECTION
The device detects the presence of an open window to limit energy consumption.
To activate this mode, activate the Stand-by mode, press the [Chrono] key for more than 3
seconds, scroll through the modes with the [+] key and select FUNC with the [Prog] key. The
window icon will flash in the top left of the screen, using the [+] key, select ON / OFF, visible
in the center of the screen, and confirm with [Prog].
The icon will be active while the thermostat is operating; If the open window is detected, the
icon will flash and the system will stop heating for a maximum of 30 minutes or until a tempe-
rature increase of at least 1.5 ° C.
ASC FUNCTION
This mode allows you to limit power consumption by lowering the set comfort temperature
by 3 degrees. By activating this mode, the device operates while maintaining a temperature
corresponding to: SET TEMPERATURE - 3 ° C.
38