Wall Mounting Instructions - Radiatori 2000 PIANO II 600/3 Guide Rapide

WALL MOUNTING INSTRUCTIONS

•
Drill the wall considering Lf [hole length] and Hf [hole height] [Fig. 4 and 4a].
• Screw in the 4 rails.
• Fix the two top wall brackets facing upwards (the screws must be inserted in
the bracket, but not fully screwed). (A) [fig.4a A et B]
• Insert a bottom wall brackets facing upwards (the screw must be inserted in the
bracket, but not fully screwed). (B) [fig.4a C et D]
• Mount the radiator by attaching it to the two top brackets. [Fig. 5]
•
Insert the two bottom wall brackets between the radiator's elements.
• Tighten all of the screws
opposite to prevent the wall radiator from tipping over.
• If there is a fault, contact your dealer. Do not alter the
product in any way; any disassembly or any opening
compromises the safety of the product. We do not
accept any liability for accidents due to any kind of
manipulation carried out on the electrical appliance.
• Do not intervene on the appliance during operation.
• Before cleaning it in any way, make sure that the
electric radiator is at room temperature and the circuit
is disconnected.
•
Insert the 2 lower wall supports in the direction
MAINTENANCE
29