Replacing The Batteries - Etekcity ESF24 Série Guide Rapide

Cleaning the Smart Scale
• Use a slightly damp cloth to clean the surface of the
scale, followed by a soft, dry cloth to wipe away any
remaining moisture.
• Do not use chemical or abrasive cleaning agents to
clean the scale.

Replacing the Batteries

The display will show "
replaced.
1. Open the battery compartment on the underside of
the scale.
2. Remove the old batteries and dispose of them properly.
3. Install 3 new 1.5V AAA batteries, making sure they are
placed under the correct polarity.
4. Replace the battery compartment cover.
Note: The scale may need to be calibrated after replacing the batteries.
" when the batteries need to be
17