TRENDnet TEW-432BRP Guide D'installation Rapide page 22

Error 323: Could Not Access New Router
1) Restore your router to factory defaults. Take a pin or paperclip and press the reset button for 15 seconds, then let go.
2) Click Cancel to exit the program.
3) Eject the CD.
4) Restart your computer.
5) Connect the Ethernet cable from your computer to the LAN port on your modem.
6) Reinsert the CD.
If you continue to have problems, you will need to log in to router and configure the your Internet connection settings manually:
1) Open up Internet Explorer, type into the address bar http://192.168.10.1 and then hit enter
2) Enter the user name and password. The default user name and password is Admin.
3) Click Main -> WAN. Select your connection type and configure your Internet connection settings. Contact your ISP for information regarding your Internet connection
settings. Once you have configured your Internet connection settings, and then click Apply.
4) If you do not get onto the Internet right away, unplug the power to your modem and router. Wait 15 seconds, then plug your modem back in. Wait for your modem to boot
up, then plug your modem back in. Once your modem has booted up, then plug your router back in. Then wait for your router to boot up.
Q5: I am trying to install the router on my Mac. What should I do?
A5: Follows steps 1-4 in question 4 to manually configure the router.
Q6: All the settings are correct, but I can not make a wireless connection to the Router. What should I do?
A6: First, double check that the WLAN light on the Router is lit. Second, power cycle the TEW-432BRP. Unplug the power to the TEW-432BRP. Wait 15 seconds, then plug the
power back in to the TEW-432BRP. Third, log into the TEW-432BRP by entering into the web browser's address bar. Click on Wireless. Make sure Enabled is selected.
Fourth, contact the manufacturer of your wireless network adapter and make sure the wireless network adapter is configured with the proper SSID.
Q7: What is Network Magic?
A7: Network Magic is an optional third party bonus program. It works with your router to setup, manage, repair and protect your home network. To install Network Magic, do not
check "No, thanks. I already know how to connect my computers and devices and set up printer and file sharing". If you do not want to install Network Magic, check "No, thanks.
I already know how to connect my computers and devices and set up printer and file sharing".
If you still encounter problems or have any questions regarding the TEW-432BRP, please refer to the User's Guide included on the Easy Go Setup CD-ROM or contact Trendnet's
Technical Support Department.
20