Install Router - TRENDnet TEW-432BRP Guide D'installation Rapide

2. Install Router

1. Connect the antenna to the
TEW-432BRP.
2. Insert the Easy Go CD-ROM
in your computer's CD-ROM
Drive and then click Install
Router.
3. Click Start Installation.
4. Choose the desired language
from the dropdown list. Click
No, thanks. I already know
how to connect my
computers and devices
and set up printer and file
sharing and then click Next.
Note: If you do not check "No thanks, I already know how to
connect my computers and devices and set up printer and file
sharing", a third party software program, Network Magic will
install. This program is not required to be installed in order to
get onto the Internet.
5. Click Next.
6. If this screen appears, go to
3. Replacing an Existing
Router or 4.Adding the
Router Behind an Existing
Router. If not, please
continue to step 7.
7. Turn off or unplug power to
your cable or DSL modem.
Then click Next.
8. Unplug the existing Ethernet
cable from your cable or DSL
modem and plug it into
yellow port number 1 on the
TEW-432BRP. Then click
Next.
Warning! DO NOT plug the cable or DSL modem power
supply into the TEW-432BRP.
10
English